Vial Cell Stoppering Shelf
With the Vial Cell Stoppering Shelf, vials can be
processed and stoppered while under vacuum. The Vial Cell comprises
four movable shelves inside a gasketed acrylic vacuum chamber, with
a stoppering handle on top. Each shelf accommodates two trays with
up to 62 vials per tray. Eight stainless steel bottle retaining
trays are included, which may also be used for bulk product drying.
For faster drying, each shelf comes equipped with a built-in heater
mat, for use with the optional Heater Kit. An integral electrical
lead-through is also supplied with the Vial Cell to connect the
Heater Kit. When coupled with the Isolation Valve accessory, the
chamber may be back-filled with an inert gas such as nitrogen prior
to stoppering the vials. The Vial Cell may be used with the
MicroModulyo, ModulyoD or SuperModulyo base units.
Heater Kit for Stoppering Shelf
The Heater Kit is a free-standing power pack that delivers a
constant low voltage output to the built-in heater mats used in the
stoppering shelf. This added heat energy enhances the drying rate
of material in vials. The included power supply lead attaches to
the electrical lead-through in the Vial Cell stoppering
shelf.
The Heater Kit is used exclusively with the Vial Cell
Stoppering Shelf.
Vials, Stoppers, Caps & Crimpers
Thermo offers a selection of vials specifically designed for
freeze drying. The vials are suitable for use with the Vial Cell
Stoppering Shelf. Rubber lyophilization stoppers, aluminum sealing
caps, and hand crimpers are also available.
Ordering Information and Specifications
Cat No
Description
Dimensions
F05623000
Vial cell stoppering shelf including: stoppering shelf assembly,
clear acrylic vacuum chamber & 8 bottle retaining trays
Diameter: 215 mm (8.46")
Height: 550 mm (21.65")
Shelf Spacing (fully open): 58 mm (2.28")
F02301124
Bottle retaining tray
Diameter: 175 mm (6.89") Radius (to tray central wall): 71 mm
(2.79") Height: 26 mm (1.02") Tray Volume: 300 ml (to top)
F02301018
Vial cell sealing gasket
Diameter: 215 mm (8.46")
F05655000
Heater kit for vial cell stoppering shelf
250 mm (W) x 194 mm (H) x 190 mm (D) 10" x 7.64" x 7.48"
220/240 V AC 50/60 Hz Output: 50 V AC at 7A
F05655115
Heater kit for vial cell stoppering shelf
250 mm (W) x 194 mm (H) x 190 mm (D) 10" x 7.64" x 7.48"
115 V AC 50/60 Hz Output: 50 V AC at 7A
Vials, low-extractable borosilicate glass (KG-33), aluminum
seal finish, without closure. Glass meets ASTM Type 1, Class A
standard. Autoclavable.
Cat No
Description
Dimensions
Approximate Height
Uses
aluminum seal
Quantity
H01430008 2 ml vial
15 mm O.D.
x 40 mm long 48 mm
13 mm
288
H01430048 5 ml vial
23 mm O.D.
x 47 mm long 55 mm
20 mm
288
H01430042 10 ml vial
23 mm O.D. x 46 mm
long 54 mm
20 mm
100
Stopper for aluminum seal finishes, gray butyl rubber,
lyophilization style.
Cat No
Description
Fits GPI aluminum seal finish
Quantity
H01430121 Stopper for 13 mm
13 mm
1000
H01430122-B Stopper for 20 mm
20 mm
1000
Aluminum seal, one piece unlined, tear-out style. Center
portion tears out to allow easy access to setpa.
Cat No
Description
Fits GPI aluminum seal finish
Quantity
H01430161 Cap for 13 mm O.D.
13 mm
1000
H01430162 Cap for 20 mm O.D.
20 or 20A mm
1000
Crimper, hand operated. Used to crimp aluminum seals on
vials.
Cat No
Description
Seal Size
H01430203 Crimper for 13 mm
O.D. Cap 13 mm
H01430204 Crimper for 20 mm
O.D. Cap 20 or 20A mm
