Specimen Drying
Bell Jar
The Bell Jar is a
clear acrylic cylinder (closed on the top). It is used for drying
smaller containers or specimens.
Acrylic Cylinder
The clear
Acrylic Cylinder is designed to be used in conjunction with the
Acrylic Lid. It is used for drying larger containers or
specimens.
Pre-Freezer Shelf & Specimen Dryer
(SuperModulyo Only)
The
Pre-Freeze Shelf is a stainless steel shelf, which is used in
conjunction with the SuperModulyo base unit. It is designed to fit
horizontally inside the condenser chamber to freeze bulk product,
when other deep freezing facilities are not available.
Ordering Information and Specifications
Cat No
|
Description |
Dimensions |
| F02960000 |
Bell jar, includes: sealing gasket |
Base Diameter: 215 mm (8.46") Height: 218 mm (8.58") |
| F05652000 |
Acrylic cylinder, includes: sealing gaskets on both ends |
Base Diameter: 350 mm (13.78") Height: 435 mm (17.13") |
| F05624000 |
Pre-freeze shelf (SuperModulyo only) |
Length: 400 mm (15.75") Width: 235 mm (9.25") |
| F05627000 |
Specimen dryer (SuperModulyo only) |
Length: 400 mm (15.75") Width: 235 mm (9.25")
Height: 170 mm (6.69") |
| F02301018 |
Replacement sealing gasket for bell jar |
Diameter: 215 mm (8.46") |
| F05652001 |
Replacement sealing gasket for acrylic cylinder |
Diameter: 350 mm (13.78") |
| F02305065 |
Work table 7" diameter. |
Diameter: 178 mm (7") Overall Height: ~30 mm (1.2")
Clearance Above Opening: ~51 mm, (~0.6") |
Adapters and Connectors
Cold Trap Adapter
The Cold
Trap Adapter is used to convert any MicroModulyo or ModulyoD ice
condenser into a high quality stainless steel cold trap with a
front bottom mounted drain. Requires the installation of a BV130
bleeder valve for proper operation.
Pipeline Attachment
The
Pipeline Attachment is used to convert the freeze drying system
into a cold trap and pump for applications other than freeze
drying.
Adapter Flange
The Adapter
Flange is a stainless steel bushing with a neoprene insert. It is
designed to allow the connection of drying accessories with a three
inch throat, such as those supplied by other manufacturers.
Ordering information and specifications
Cat No
|
Description |
Dimensions |
| F05660000 |
Cold Trap Adapter |
Base Diameter: 215 mm (8.50") Port Diameter: NW40 |
| F02305082 |
Pipeline Attachment |
Base Diameter: 215 mm (8.50") Port Diameter: 28 mm O.D. |
| F05626000 |
Adapter Flange |
Base Diameter: 215 mm (8.50") Throat Diameter: 7.62 mm
(3") |
| FDSV5000 |
SpeedVac Adapter |
