Typical use of these pumps would be as follows.

• Laboratory research
• Pharmaceutical applications
• Freeze drying and gel drying
• Composite moulding and silicone resin degassing
• Backing of diffusion pumps and turbo molecular pumps
• Vacuum bagging
• UHV ultra high vacuum systems
• Vacuum filtration
• Centrifuge concentration
• Distillation and extraction apparatus
• Glove boxes , fume hoods and vacuum load locks
• Recirculation of rare gases such as helium
• Azide applications
• Vacuum furnaces and vacuum ovens
• Electron microscopes , mass spectrometers and lasers
• Air conditioning refrigeration and dehydration
  

---

Edwards^® RV5 Rotary vane pump
Technical Data

Displacement
50 Hz operation 5.8 m³h^-1 / 3.4 ft³min^-1
60 Hz operation 7.0 m³h^-1 / 4.1 ft³min^-1
Speed (Pneurop 6602)
50 Hz operation 5.1 m³h-1 / 3 ft3min^-1
60 Hz operation 6.2 m³h-1 / 3.6 ft3min^-1
GAS BALLAST         ULTIMATE VACUUM (TOTAL PRESSURE)
                                     HIGH VACUUM MODE             HIGH THROUGHPUT MODE
Closed                        2 x 10^-3 mbar /                             3 x 10^-2 mbar /
                                     1.5 x 10^-3 Torr                              2.3 x 10^-2 Torr
Low flow, I                 3 x 10^-2 mbar /                             6 x 10^-2 mbar /
                                     2.3 x 10^-2 Torr                              4.6 x 10^-2 Torr
High flow, II                                                                      1 x 10^-1 mbar /
                                                                                            9.1 x 10^-2 Torr
Inlet connection
NW25
Outlet connection
NW25
Maximum allowed outlet pressure
1 bar gauge / 14 psig
Maximum allowed inlet and gas ballast pressure
0.5 bar gauge / 7 psig
Maximum water vapor inlet pressure
50 mbar / 38 Torr
Maximum water vapor pumping rate
Gas ballast low flow
60 g h-1
Gas ballast high flow
220 g h-1
Motor power
50Hz 250 W
60Hz 300 W
Electrical supply
1-phase
110-120 V or 220-240 V,
50 or 60 Hz
3-phase
200-230 V or 380-460 V,
50 or 60 Hz
Operating temperature range
12 – 40 ºC
Weight, without oil
21.5 kg / 43 lbs
Noise
48 dB(A)@ 50 Hz
Oil capacity
Maximum 0.7 liter
Minimum 0.42 liter
Recommended oil
 Ultragrade 19

---

Edwards® RV5 Rotary vane pump

Total Pressure

---

Edwards® RV5 Rotary vane pump

Diagram

---

Edwards® RV5 Rotary vane pump

Ordering information

Edwards® RV5 pump
115/230 V, 1-ph, 50/60 Hz,
Factory set to 230 V for Europe A65301903
Factory set to 115 V for USA A65301906
100/200 V, 1-ph, 50/60 Hz
Factory set to 200 V for Japan A65301904
200-220/380-415 V, 3-ph, 50 Hz and 200-230/460 V, 3-ph, 60 Hz
Factory set to 380/460 V A65301905
Supplied with: 1 liter of Ultragrade 19 oil, inlet filter and "O" ring.

Edwards® RV5 ACCESSORIES
2 m electrical supply cable with IEC socket for 1-ph pumps
UK, three-pin plug A50505000
North European plug A50506000
North America/Japan plug A50507000
No plug A50508000
RV gas-ballast adaptor A50502000
RV exhaust nozzle kit, £/4 inch BSP to 15 mm hose A50509000
EMF10 outlet mist filter A46226000

Edwards® RV5 SPARES
The clean and overhaul kit contains all of the springs, gaskets, seals and other
components required for routine maintenance and whenever the pump is dismantled.
Add a blade kit for a full service.
Clean and overhaul kit A65201131
Blade kit A65301130
Outer shaft seal kit A65201134
Inlet valve kit A65201036
Cartridge kit A65301032

PRODUCT DESCRIPTION | ATEX CLASSIFICATION  | ORDER NUMBER
RV5 pump – flameproof motor options
ATEX RV5 230 V, 1-ph, 50 Hz II 2G IIB T4 External A65318991
ATEX RV5 230 V, 1-ph, 50 Hz II 2G IIC T4 External A65318989
ATEX RV5 230 V, 1-ph, 60 Hz II 2G IIB T4 External A65318988
ATEX RV5 230 V, 1-ph, 60 Hz II 2G IIC T4 External A65318990
ATEX RV5 115 V, 1-ph, 60 Hz II 2G IIB T4 External A65318987
ATEX RV5 115 V, 1-ph, 60 Hz II 2G IIC T4 External A65318986
ATEX RV5 400 V, 3-ph, 50 Hz II 2G IIB T4 External A65318993
ATEX RV5 400 V, 3-ph, 50 Hz II 2G IIC T4 External A65318992
ATEX pumps with flameproof motors require the user to provide:
2 off hazardous area cable glands and cables.
Connection of the thermistors to an appropriate safety circuit to switch off the pump if overheating
occurs.

RV5 pump – PFPE prepared*
115/230 V, 1-ph, 50/60 Hz,
Factory set to 230 V for Europe A65309903
Factory set to 115 V for USA A65309906
100/200 V, 1-ph, 50/60 Hz
Factory set to 200 V for Japan A65309904
200-220/380-415 V, 3-ph, 50 Hz and 200-230/460 V, 3-ph, 60 Hz
Factory set to 380/460 V A65309905
* PFPE fluid not included.

---

---

we also hire vacuum  pumps, we buy vacuum pumps
we also do service exchange, recon, reconditioned and remanufactured pumps