Edwards^® Turbo pump 24 V

Edwards^® Turbo pump options

TIC variant

100 W

200 W

Edwards^® EXT75DX

Edwards^® EXT255H & EXDC80*

Edwards^® EXT255H & EXDC160

Fast

Slow

N/A

Fast

Slow

Fast

Logic Interface

Control inputs

Turbo start/stop*

Turbo standby

Backing pump start/stop*

System interlock SYSI

Control outputs

Vent valve control

Heater band control

Backing pump control

Air cooler

Status outputs

Analog output

Set point A, B, C

Turbo normal speed/alarm

Serial interface

Start/stop commands are "edge triggered".

The logic interface connector includes the functions listed below.
It may be used either to link to system relays,
a higher-level control system, or an optional relay box.
By utilizing the relay box pass-through connector,
a combination of a higher-level control system and relay box may be used.

Closed when low: < 0.5 V d.c.

Open when High: 4 to 24 V d.c.

Closed when low: < 0.5 V d.c.

Open when High: 4 to 24 V d.c.

Closed when low: < 0.5 V d.c.

Open when High: 4 to 24 V d.c.

Closed when low: < 0.5 V d.c.

Open when High: 4 to 24 V d.c.

O/C 24 V d.c. 100 mA

O/C 24 V d.c. 50 mA

O/C 24 V d.c. 100 mA

O/C 24 V d.c. 200 mA

0-10 V d.c.

O/C 24 V d.c. 50 mA

O/C 24 V d.c. 50m A

The TIC has two built-in communications protocols, RS232 and RS485.These may be used either to interface to a PLC or, using the WindowsTM PC software package supplied connected to a PC for full monitoring and control of a TIC system.

TIC turbo controller

100 W RS232

TIC turbo controller

200 W RS232

Power consumption

215 VA

350 VA

Electrical supply

Peak inrush current

Fuse

Earth stud

90 to 264 V.a.c. 47 to 63 Hz

10.3 A @ 110 V a.c.

23.0 A @ 230 V a.c.

TIC is self-protecting and has no user replaceable fuse.
The unit will recover when the overload is removed.

M4

Auxiliary terminals

Air cooling fan

Vent Valve

Interface cables

Dimensions

Electronics housing

Front panel

Weight

TIC Turbo controller 100 W RS232

TIC Turbo controller 200 W RS232

Operating temperature

Storage temperature

Maximum ambient operating humidity

Maximum operating altitude

Electronic design

Electromagnetic compatibility (Industrial Location, Class B Emissions)

Enclosure rating

24 V d.c. 3 W max, ACX70, ACX75 & ACX250H

24 V d.c. 2 W max, TAV5 & TAV6

Use cables as specified in "ordering information"

110 mm high x 105 mm wide x 245 mm deep

106 mm wide x 128 mm high

2.75 kg

3.5 kg

+0 ° to +40 °C

-30 ° to +70 °C

90% RH non-condensing at 40 °C

3000 m

EN 61010-1

EN 61326

IP20